How to clean phone speaker holes
When you keep your mobile in your pocket or bags and go outside, dust and debris enter speaker holes and accumulate particles, causing bad-quality sound. Don’t avoid it because it will damage your speaker.
We will let you know, how you can clean phone speaker holes whether it is affected by dust, debris, or water by using things that are commonly available at every home.
We have mentioned many useful methods to clean your phone speakers grill by yourself at home rather than going anywhere to make it clean.
What you need?
You need some cotton buds, a medium-sized toothbrush or a soft dry paintbrush, a sticky tack, an air blower, and painter’s tape to clean your phone speaker holes properly.
Before cleaning your phone speaker holes you must be confident in dealing with the phone correctly.
You can easily spew out water from your phone speaker holes by using a vibrant sound which is given in fixmyspeakeer.
Things to do
Finding the location of your phone speaker
First of all, when we are going to clean our speaker holes it is essential to locate them, in some phones the speaker holes are located near the charging port or backside of the phone. It’s common for ear speakers to be located on the top of the front face of the phone where you place your ear.
Cleaning phone speaker holes with a cotton bud
Secondly, you can use cotton buds to clean them. Using cotton buds for cleaning phone holes is good for cleaning the speaker surface area if the speaker holes are not properly cleaned of dust and debris.
The method is to gently rub the speaker surface area clockwise or anti-clockwise giving a little bit of pressure on the surface. Keep on doing this process until you feel that all dust particles have come out.
Note: Swap the cotton bud when it becomes dirty.
Cleaning phone speaker holes with a soft toothbrush
Thirdly, cleaning the phone speaker holes with a medium-sized toothbrush is the most effective method to clean speaker holes but there is one more thing, sometimes dust particles go inside the speaker so make sure when you clean speaker holes, they are facing down.
Move the brush towards either the top or bottom of your phone. Make sure it’s perpendicular to the top of your phone while moving it up and down. After that, rotate your toothbrush vertically by moving it in left and right motions after flipping it vertically (perpendicular to the side of your phone).
If still, you feel that the dust has gone in, after that use the sticky tack method which we have mentioned below.
Remember:
To deal with stubborn dirt, angle the brush upward and use the bottom bristles to scrub.
A medium-sized brush is the ideal tool for cleaning speakers, as soft bristles cannot effectively remove dirt and strong brushes are too thick to fit into the small holes.
Cleaning phone speaker holes with sticky tack
Fourthly, to remove dust and dirt, try a sticky tack, but be careful not to push it into the speaker holes. During your shopping, search for a product that is as sticky as possible.
The objective is to remove dust and dirt from your phone by cleaning rather than pushing it into it. The process is written below step by step.
Remember:
The sticky tack should be visible with dirt stuck to it.
Don’t stop until the dirt is no longer coming out of the speakers.
Make sure to always use your sticky tack with a clean surface by moving it around.
Cleaning phone speaker holes with an air blower
Fifth is, that using an air blower is recommended. The safety of smartphones can be assured with this tool, which is completely different from compressed air. After you’ve wiped your smartphone speakers with either a dry cloth or the medium-sized brush mentioned previously, give it a shot using one.
Cleaning phone speaker holes with painter’s tape
Sixth is that you can use another tool to clean your phone speakers, which is painter’s tape. It is also the easiest and most effective method to clean your phone speaker holes, what you have to do is gradually written below.
